Guides by Aircooledbug

Cleaning the EGR Valve. Tools needed: 10mm Spanner or 10mm Socket Set 13mm Spanner 5&6mm Hex Key 5mm Torx Key Long nosed pliers Small Wire Brush (sort you use to clean spark plugs) Cloth Patience! :rolleyes: And finally a nice cup of tea! ;) Its important before doing this task to disconnect...

After removing the bumper ( look at my thread on removing it ) there are 3 screws holding the lamp into place, on on top by the wing, one on the top of the grille, and one by the wheel (only accessable by removing the bumper) then carefully pull the light and lifting the black plastic piece that...

Here is a guide on how to remove the front bumper on the Grande Punto. First thing is to is remove the grilles top and bottom. Jack the car up and put on axle stands (makes the job alot easier!) if not do one side at a time. Undo the screws, working from the bottom, up. (If you have fog...

Removing the mirror caps. Grab the cap (nearest the car) the larger part and pull towards you... Simple as that. There are four parts inside the mirror cap that hold it to the main mirror.