Some P#*! has dented my rear quarter panel with a door - right in the middle of the line that runs down the car.
Just rang dent devils and they have quoted £75 all in for repair - waitng now for the technician to ring to arrange repair.
Will post some pics before and after.
Unfortunatly i do not know who did this but prob a 4x4 because the dent is so high.
gutted.

W*****s!. Your not the first to need body repair though I scratched my bumper just below the headlight when going down a very narrow back alley (crap turning circle). I decided to do the work my self and its turned out great .

Just incase you want to know what a GP looks like without a bumper .

ChrisUK said:

W*****s!. Your not the first to need body repair though I scratched my bumper just below the headlight when going down a very narrow back alley (crap turning circle). I decided to do the work my self and its turned out great .

Just incase you want to know what a GP looks like without a bumper .

Click to expand...

by your self ehhh

was definatly a learning experiance and also very easy(except getting the bolts from underneath near the back of the light they were torture :bang: )

Shauncorwyn said:

Some P#*! has dented my rear quarter panel with a door - right in the middle of the line that runs down the car.
Just rang dent devils and they have quoted £75 all in for repair - waitng now for the technician to ring to arrange repair.
Will post some pics before and after.
Unfortunatly i do not know who did this but prob a 4x4 because the dent is so high.
gutted.

Click to expand...

I have now had the dent repaired excellent job you can not see it at all.
Cost me £50 to get done - cheaper than the £75 quoted but still feel short changed when it took about 10 minutes for them to do - i must be in the wrong job - do a couple of them a day nice profit there.

ChrisUK said:

Just incase you want to know what a GP looks like without a bumper .

Click to expand...

Hey Chris, what was unvolved in removing the bumper?
I've got a xenon kit to install, and cannot find a decent place to mount
the ballasts (they are about the size of 2 fag packets stuck together each)

theres just no room under the bonnet close to the head lights (cables only about 12inches)

I reckon i could find plenty of options with the bumper off.

Cheers,

deeyup

Not much really. There is 4 bolts under the bonnet, then another 4 on the bottom of the bumper, then another 4 (2 at each side) bolting the bumper into the wing's very awkward to get I recommend fully or partially removing the wheels arch plastic .