Anyone know where I can obtain the small screws that hold the drum in place? I know they are not essential but a pain sometimes putting the wheel on and the drum moves.

I found ones for the discs, not sure if they are the same for the drums though.

https://www.ebay.co.uk/i/312180506770?chn=ps&norover=1&mkevt=1&mkrid=710-153316-527457-8&mkcid=2&itemid=312180506770&targetid=4584894773047612&device=c&mktype=&googleloc=&poi=&campaignid=398226962&mkgroupid=1300722490880837&rlsatarget=pla-4584894773047612&abcId=2145997&merchantid=87779&msclkid=bcfa768e204c165339ea29cb291461f3

Vauxhall dealer

Theses?
http://www.ebay.co.uk/itm/401880281733

I've just realised how tight I really am..Id go to my local breakers..£8 for four screws!!!!...

nikrox said:

I've just realised how tight I really am..Id go to my local breakers..£8 for four screws!!!!...

Click to expand...

And by the time you drive there took 4 wheels of a car and took the bolts out quite possibly more then 4 as they like to snap off if not touched for several years

chris3234 said:

And by the time you drive there took 4 wheels of a car and took the bolts out quite possibly more then 4 as they like to snap off if not touched for several years

Click to expand...

All the wheels are off the cars at my local breakers..BUT fair point made.

Im lucky in that my time is my own,being retired and often go to my breakers to 'browse'..after going there for the last 38 years its also a bit of a social.

https://www.screwfix.com/p/easyfix-...ws-a2-stainless-steel-m6-x-16mm-50-pack/6197t
If too long cut a bit off
You will have 48 spare

jackwhoo said:

https://www.screwfix.com/p/easyfix-...ws-a2-stainless-steel-m6-x-16mm-50-pack/6197t
If too long cut a bit off
You will have 48 spare

Click to expand...

Thats nearly £7..per 100

OUTRAGEOUS ..!!

jackwhoo said:

https://www.screwfix.com/p/easyfix-...ws-a2-stainless-steel-m6-x-16mm-50-pack/6197t
If too long cut a bit off
You will have 48 spare

Click to expand...

Not going to help fit the wheels even if the fiat discs were counter sunk for these to fit in correctly

All 4 of my 199's use countersunk screws..

This is a GM product.. not a FIAT..

Not sure there are even holes in the wheels..

nikrox said:

All the wheels are off the cars at my local breakers..BUT fair point made.

Im lucky in that my time is my own,being retired and often go to my breakers to 'browse'..after going there for the last 38 years its also a bit of a social.

Click to expand...

There's not many scrap yards left around my way let alone those that let you walk around and browse

Are the M6's ? If so I can get M6x 10mm on fleabay for a couple of quid

Panther96 said:

Are the M6's ? If so I can get M6x 10mm on fleabay for a couple of quid

Click to expand...

Probably..

Mine are all working fine.. so never measured them

Being a Torx.... I cannot directly relate that to :


M6 X 1.0

OR

M5 X 0.8

For the costs involved
Maybe buy both..

IF you have accoss the the hub..

You can JUST pass the shank of a 5.0 drill down an M6 tapped hole

M5 would be 4.2mm drill

Charlie

How about these?

Bremtech Disc Retaining Screw DRS1667 M6X1.0 TX30 10.9

https://brakeparts.co.uk/shop/Fiat/...NC Turbo/Rear - Brake Discs and Drums/DRS1667

£0.72 each + P&P (£2.50)

Useful diagram with dimensions on the above page too.