Any help appreciated I have a Punto grande 1.2 55 plate 2006 and it has a couple of problems the electrical steering column needs replacing and the indicators aren't working but the hazards do. The wipers aren't working at all either and main beam doesn't work. When I turn ignition on sometimes the lights stay on go home mode I think it's called. I have found fuse diagrams but I cannot find a indicator fuse so I can check mine Thanks again for any help.

You probably have a mess in the column wiring or at body computer level ... (moisture ?)
Here is the drawing for the warnings/direction indicators; as you can see the hazards and direction commands come from two different devices, one located at the dash console and the other at the Wheel stack, why one works and the other not . Seems there is no specific fuse for that circuit.

BRs, Bernie

If someone here helped You fix -or better, understand- your issue, hit the thanks icon @ bottom right corner, it's free and makes us feel helpy ;-)

Thanks for the reply I managed to get a second hand indicator/wiper cluster today swapped it over and now it all works fine indicators everything but it has immobilised it's self I unplugged the battery before swapping the cluster for way longer than 30 minutes. I have left the car without the battery for tonight and charged it ready for tomorrow hoping it cures the problem I did try leaving it for half hour but my battery was pretty weak I will update if it does the trick thanks.