Technical 1.9 JTD what oil meets specification?

Currently reading:
Technical 1.9 JTD what oil meets specification?

ProTofik

New member
Joined
Jul 12, 2017
Messages
7
Points
5
Hello.
So oil change is due soon in my Grande Punto Multijet Sporting with 1.9JTD. I would like to replace it with what's recommended by manufacturer but apparently Selina doesn't make it any more.

So I am looking for a Fully Synthetic SAE 5W-40 ACEA B4 oil. Does it even exist?
All B4 oils I find are 10W40, and 5W40 are C4, but nothing that would meet both requirements at the same time.

Any advice?
 
I tried using these selectors but they seem useless. Castrol recommended me Magnatec Stop-Start 5W-30 C2 and Mobil1 told me to get FS x1 5W-50.

Anyway, I did some more research after posting here and found that Total, Mobil1, and Shell do oil to the correct specification.
 
http://www.ebay.de/itm/5-L-LITER-CA...690418?hash=item566c82abb2:g:ko4AAOSwI6RZzDr7

I use this in my Alfa GT 1,9 JTD ( with removed catalyst), it's HC synthetic, but ONLY available from Castrol Germany.
So I buy it at Ebay.de

1-10801079.jpg
 
Last edited:
This post contains affiliate links which may earn a commission at no additional cost to you.
Hello.
So oil change is due soon in my Grande Punto Multijet Sporting with 1.9JTD. I would like to replace it with what's recommended by manufacturer but apparently Selina doesn't make it any more.

So I am looking for a Fully Synthetic SAE 5W-40 ACEA B4 oil. Does it even exist?
All B4 oils I find are 10W40, and 5W40 are C4, but nothing that would meet both requirements at the same time.

Any advice?

TOTAL QUARTZ 9000 5W-40

or this one

Total Quartz 9000 SN 5w40

It's ACEA a3/b4 fully sysntetic.
 
Last edited:
Back
Top