Hello everybody!

Here is the problem:
My car when I reach 120KM/H my car starts to beep like an alarm clock until I get less than 115KM/H

I have changed my instrument cluster in my Grande Punto Dynamic Version with an Emotion Version instrument cluster.
The differences between my Dynamic and Emotion from scrap yard is:
Dynamic: Emotion:
Year: 2007 2008

Particle
Filter: No Maybe

Oil
Presure
Sensor: OK ???

External
Lights: OK ???

Rain
Sensor: NO UNKNOWN

Parking
Sensor: NO UNKNOWN

TMPS
Sensor: NO UNKNOWN

In manual says that it shows up when one or various problems appears. I think that problem is due to I don't have particle filter, all other systems does not have any sense, because it shows up when I reach 120KM/H and car can not do the regeneration proceedment, and I have to slow down to 115KM/H to disable the sound. I made Proxy Aligment and odometer is ok (no flashing). So... Are there a way to fix this issue? Thanks in advance!

The speed beep is just a setting on the menu!! Press menu, scroll down to Speed Beep, and change the speed it beeps at or turn it off completely.

Cadabena said:

The speed beep is just a setting on the menu!! Press menu, scroll down to Speed Beep, and change the speed it beeps at or turn it off completely.

Click to expand...

It is already off:



It also shows up an exclamation symbol yellow like if my headlights were blown like this, but it is not due to blown lights, since it shows up even at day time when I have the lights off:

turn the speed beep on.. set it to something like 210km/h maybe there is a miss-alignment between what it shows and what the car was set to before replacing it.

aurick86 said:

turn the speed beep on.. set it to something like 210km/h maybe there is a miss-alignment between what it shows and what the car was set to before replacing it.

Click to expand...

I've tryed it before, for example, if I set speed limit to 115km/h car beeps normal (one beep like low fuel), but when I reach 120km/h starts the "alarm clock" and yellow exclamation symbol appears

ok.. how about connecting with MES to the ABS unit, and seeing the speeds of each individual wheel.....maybe it thinks it's slipping /sliding because one of the wheel speed sensors is not reading well.

aurick86 said:

ok.. how about connecting with MES to the ABS unit, and seeing the speeds of each individual wheel.....maybe it thinks it's slipping /sliding because one of the wheel speed sensors is not reading well.

Click to expand...

I think that maybe is the tmps sensors, that I turned it on once that I was testing ALFAOBD. I will check it and then tell you that if it is ok or not. ABS unit works perfect, I tested it with default instrument cluster and no beeps when I reach 120km/h

Now I know why, I had bad body computer configuration and air intake sensor(the sensor that is next to air filter box) was also damaged. I made a few proxy aligment with MultiECU Scan and AlfaOBD due to I have installed cruise control on my car and now no more beeps. I also deactivated the particle filter and some other things that accidentally I have activated. Maybe it was a bad Proxy Aligment with Android AlfaOBD...I am not sure