Technical Cruise control stalk

Currently reading:
Technical Cruise control stalk

tady86

New member
Joined
Mar 6, 2014
Messages
4
Points
3
Hello!
Yet again a cruise control question :)
I have a GP 1.9 jtd 2008 and originally it doesn't have cruise control. I don't even have a wire from the steering wheel to the body computer. So i wired my own, with Multiecuscan an ELM327 i have enabled the cruise control and i did a proxy aligment.
I don't want to buy a stalk with CC before I get everything working (don't want to throw away 200€). I found that the GP cruise control stalk uses only two wires. Ground and signal. The schematics show all the buttons with resistors so i'm assuming that they are different and i cant find the values.
Does anyone have cruise control in their GP and i there anyone willing to measure the values?
Or is there anyone that already did something like this.
I searched alot of forums and alot of threads. Plus i turned Google upside down and no luck:(
Thank you!
 
Hi

You can find this information in elearn Grande Punto (you can download in the download section)

Open elearn in the search option write 5580AF

(Test equipment-Special accessory- 5580AF Cruise Control)

It has the resistors values

Good luck.
 
Back
Top