Hey all again,

Unfortunately I still can't seem to find a solution to my headlight problem. So far I have tried the following:

- Replaced both bulbs
- Replaced fuses
- Replaced relays
- Taken out fuse box, cleaned all contacts, dried out, fitted back
- Replaced fuse box

Still nothing! The main beams work, and side lights. I have read the body computer could be an issue. Is this the next thing to check or is there something I'm missing?

Any help with this is appreciated.

Do you have a test meter? If so are you getting any power to the dip beam at the headlight?

Just done a test.. No power to dip beam.

If it helps at all, the engine management light is now illuminated!

jamied92 said:

If it helps at all, the engine management light is now illuminated!

Click to expand...

sounds like you've got trouble..,
get the engine code read.. ideally use a better reader to scan the body computer too,

Charlie - Oxford

I'm going to see if I can pick one up and I'll get back to you with codes

No codes. The engine management light turned itself off as we connected up the diagnostic device and has remained off. Any ideas?

jamied92 said:

No codes. The engine management light turned itself off as we connected up the diagnostic device and has remained off. Any ideas?

Click to expand...

poor earth

clean up the ones you can see,
there is a fair chance you've got a stalk problem with the lights.. but other odd electrical issues point to something simpler - poor electrical supply

Charlie

varesecrazy said:

poor earth

clean up the ones you can see,
there is a fair chance you've got a stalk problem with the lights.. but other odd electrical issues point to something simpler - poor electrical supply

Charlie

Click to expand...

I don't think it's the stalk because I did the follow me lights test and the headlights don't turn on. They would be on at that point if it was a stalk issue.

I'm not sure what option to take next..