Northern Auto Tech - ECU and Blue & Me Repairs

Technical wheres coolant bleed nipples on grande punto 2006 1.2

Currently reading:
Technical wheres coolant bleed nipples on grande punto 2006 1.2

C

chippy72

New member
Joined
Feb 9, 2015
Messages
1
Points
1
Hi new to this so please bare with me,im having problems with my heating,it only blows luke warm even when temp gauge is up to norm.its never over heated,no oil in water and vice versa no problems starting,so just wondering if it needs bleeding and where are the nipples to do this?:)
 
You don't have to bleed from that radiator bleed screw. This is only for coolant change procedure.

Remove passenger side foot trim and touch heater pipes. Make sure both hoses are hot. (warning: they should be very hot)

Could be just an air flap issue, a stuck open thermostat or clogged heater.
 
cmosfxx said:
You don't have to bleed from that radiator bleed screw. This is only for coolant change procedure.

Remove passenger side foot trim and touch heater pipes. Make sure both hoses are hot. (warning: they should be very hot)

Could be just an air flap issue, a stuck open thermostat or clogged heater.
Click to expand...



how are you bleeding it then? I've always done it from here
 
You just don't have to bleed it again. The system is made that way, air bubbles eventually will pass from the expansion tank through return pipe.
 
You must log in or register to reply here.

Similar threads

S
Technical Coolant leak
Replies
2
Views
119
Sausage
S
Sanial
  • Question
Technical (2006 Grande Punto) Driver side window controls not working
Replies
0
Views
164
Sanial
Sanial
Zayinconde
General Burble, popping on decel in 1st & 2nd
Replies
1
Views
53
GrandePunto PL
GrandePunto PL
Banduka Jayasundara
Technical Engine Check Light with misfire error - Punto Grand (2006)
Replies
1
Views
132
GrandePunto PL
GrandePunto PL
M
  • Question
Technical What is this part called on the engine block(grande punto1.4 16v 2006)
Replies
7
Views
290
mrkucuk
M
Back
Top