Technical gears stuck in neutral

Currently reading:
Technical gears stuck in neutral

ame

New member
Joined
Feb 26, 2013
Messages
43
Points
16
Location
west midlands
hello friends ..i have a dualogic (grande punto 1.4 07) had a error (gear selecter mem) ?? car crunches bad when engaging gear into reverse & then goes into neutral ..car is in garage at the moment (as car was stuck in neutral & could not select any gear) any ideas ?? many thanks
 
Hi,
it's a manual gearbox driven by electronics/actuators,
similar to the Alfa selepeed system,
don't know what kind of garage it's at, but beware of them changing the expensive parts without PROPER diagnosis..,
the garage under the arches - near the Bullring is recommended -ask for details,
"motormech" -https://www.fiatforum.com/garages/351780-anyone-know-good-garage-punto-west-midlands-area.html

here's a thread about the things to test ( panda - same system)
https://www.fiatforum.com/panda/359279-57-1-2-eleganza-jerking-kangarooing-flat-spot.html

Charlie
 
Last edited:
Hi,
it's a manual gearbox driven by electronics/actuators,
similar to the Alfa selepeed system,
don't know what kind of garage it's at, but beware of them changing the expensive parts without PROPER diagnosis..,
the garage under the arches - near the Bullring is recommended -ask for details,
"motormech" -https://www.fiatforum.com/garages/351780-anyone-know-good-garage-punto-west-midlands-area.html

here's a thread about the things to test ( panda - same system)
https://www.fiatforum.com/panda/359279-57-1-2-eleganza-jerking-kangarooing-flat-spot.html

Charlie
thanks for you reply ..yes it is a semi auto dualogic (it's at WAD wolverhampton) independent fiat afla specialist (they got all the main dealer gizmos etc) car drives fine for about a hour then can't engage reverse ..and when you do engage reverse puts it in permanent neutral ??? it's so annoying i've had enough
 
Back
Top