Technical Cruise Control Not Working -no lights nothing

Currently reading:
Technical Cruise Control Not Working -no lights nothing

Joined
Jun 28, 2010
Messages
13
Points
5
Location
Lisbon, Portugal
Hi,

Having a problem, on my Grande Punto Sport (1.3 90hp)

Basically, car was stopped for a week and a half, to replace an injector, and the o-rings, battery of course drained, but is working now i suppose.

All is great, except for one thing, the Cruise Control.

When i press ON on the lever of the CC, it does nothing at all, its no lights, nothing on the screen, just nothing.

Is there by any chance, the possibility of anything disconnected? is there a place i can look for the connectors?

Any plug on the engine bay (because no one was messing inside of the car, only was used to code the injectores on the obd socket...)

Could it be that when the battery was so much time disconnected, it would need a proxi aligment for it to work? but in that case, it should give me an error instead of just nothing right? well im lost here
Any help would be much appreciated.thanks
 
On older puntos there was a connector behind/under the fusebox in the engine bay which would work lose, it's possible that a similar thing has happened while the car was being worked on.

As for proxi-alignment if you plug in it will tell you if the car knows of the presence of cruise control if not then you will get no error codes or anything as the car will think there is nothing wrong
 
Back
Top