Hi Guys / Girls,

My driverside window is driving me mad when I try to lower it, it will only travel 75mm and then stop, I have to do this 5 times to get the window fully open then again 5 times to shut the window !!

Passenger side works fine.

I looked in the owners manual and it refers to a system restore due to anti crush being enabled but I cant restore it, any ideas or any one else had this ?????:bang:

Cheers

Get it all the way down, then once it's at the bottom, press and hold the "down" button for 2 secs. Now work it all the way back up, and once at the top, press and hold the "up" button for 2 secs. After this it should have learnt the lower and upper limits, and work as normal.

D4nny8oy said:

Get it all the way down, then once it's at the bottom, press and hold the "down" button for 2 secs. Now work it all the way back up, and once at the top, press and hold the "up" button for 2 secs. After this it should have learnt the lower and upper limits, and work as normal.

Click to expand...

See this right here? This is why I love this place.

D4nny8oy said:

Get it all the way down, then once it's at the bottom, press and hold the "down" button for 2 secs. Now work it all the way back up, and once at the top, press and hold the "up" button for 2 secs. After this it should have learnt the lower and upper limits, and work as normal.

Click to expand...

Thanks for the reply, but alas no success, I've taken the drivers side window control buttons off the car door and when opening and closing the window I can feel a relay operating that must be breaking the supply to the window motor. I'm completely beaten by this, but it annoys me every time I use the window.

I can only presume the motor is faulty and drawing too much current (the anti-crush feature is based on the sudden current spike across the motor from something obstructing the glass' travel). You could try another control panel from a scrappy, but I suspect the motor is more likely to be the cause.