Iv bought a set of stilo Abarth 17's for my gp I have bought wobbly bolts aswell.

Centre bore of stilo alloys is 58.1 and the gp 56.6

Will I need spigots?

I am struggling to find them in the size reduction needed anyone know where I can get them for the above?

Thanks

Go on ebay or google, find a company that sells loads of them and email them asking for that size. Wont cost much more if not just the same price as any other spigot adaptors.

My friend had them custom made and they were a smaller reduction than that.

Ok after a night of searching I'm still at a dead end.

Will I need spigot rings for sure for these stilo wheels? Or will I get away without?

I have wobbly bolts on the way

Yeah you will need them. Like i said, just get them custom made, will take around a week tops and be no more than £20.

ok - 6 YEARS later..
I'm in a similar spot,

bought an elderly MJ GP

steel wheels are wreched..

I have a set of Mk2 punto 15" sporting alloys ( I've used them for 2.5 yrs - fitted new tyres last year - see my marea ad.)

I can fairly accurately measure the bores of both .. and also can compare to 2012 Punto alloy wheels,

I'm fairly happy getting / building adaptors..
BUT - know NOTHING about "wobble-bolts"


the GP = 100PCD , the FIAT's 98mm , that's 1.0 mm per side ,

bolt clearances in wheels = @0.5 , so threads would "almost" work..

but of course I'm still 1.0 mm out on the mating cones on the wheels and bolts

so I'm not looking for much..


anybody have experience to guide me..?

thanks,
Charlie