Anyone know the cheapest place to buy spacers?

http://www.motorsportworld.co.uk/frame-manranges.asp?code=7

Where I'm getting mine from unless anyone finds them cheaper

richie.guy used to have an ad in the classifieds, definitely worth sending him a PM but depends what size you're after.

More expensive than I thought they'd be! Never looked at prices before.
Oh and cheers Eclipze

*k

Are 'punto' ones the same as grande punto ones (referring to the site gpactivesport gave me)

No. GP are 4x100, centre bore 56.1mm, standard Fiat (ie. Punto) are 4x98, 58.1mm

What size spacers are you after? FK Automotive do various sizes for the GP/Corsa.

I was going to get the corsa d ones or email them and see if they had any for a grande

What size spacer are you looking for mate?. Defenatly get hub centric, remember centre bore is 56.6 and pcd is 4x100 .. Corsa c's are the same and more popular..

I've no idea what im talking about when it comes to spacers. What's recommended? (Pictures?)

They're not toys, bear in mind that spacing the wheels too far out will put additional strain on a multitude of components. There is a standard acceptable offset (ET) value for every car, staying within about 3mm of that either way is acceptable but adding an extra 25mm say is just stupid and asking for trouble.

Personally, I don't know what standard offset on a Grande is (I'm sure the answer will be in one of your FAQ's though). The 'point' of spacers, is to allow the fitting of aftermarket wheels which have limited offset options, in order to get them to sit properly and keep any drivetrain stresses within acceptable limits.

And don't forget that the Abarth Puntos have an additional 10mm spacing from standard so the alloys can get past the Brembo brakes.

I seem to remember PuntoMatt having spacers. What were they?

Krysten CTR said:

And don't forget that the Abarth Puntos have an additional 10mm spacing from standard so the alloys can get past the Brembo brakes.

Click to expand...

And that just about does it. Have you seen how close the calipers are to the alloys ? You could get a sheet of paper inbetween them! : P