im going to sort a spare wheel out in the next few weeks so i can get rid of the fix and go kit.

im thinking just getting a 15" steelie like on the actives, and a budget tyre.

will it matter if i have 1 15" and 3 17" wheels? obviously it will only be for a short distance to keep me out of trouble!
and will i be able to use the same bolts?

Try and match the original wheels rolling radius as closely as possible and you should be fine.

185/65/15 is close or 195/60/15 is closer if it will fit on the rim.

Ittl just be like having a space saver really, and obviously due to the increased sidewall you'll wander a little more when cornering to that side.

Bolts depends on the rim really, dont forget your alloys take a tapered bolt, this will likely not tighten up correctly on a steely.

Hey saw this on ebay the other day dont know if it will be any good for?

http://cgi.ebay.co.uk/Pirelli-P3000..._tyres_Rims_Car_Wheels_ET?hash=item19b8f10823

I bought a spare off ebay about a year ago and as its from a gp shouldn't be any problems.

Nice one don't fancy driving allege wayto Luton though lol! I'll keep my eyes open for one local!

Does any one know of the jack will be suitable for the the weight of the mjet130?

nickkk said:

Nice one don't fancy driving allege wayto Luton though lol! I'll keep my eyes open for one local!

Does any one know of the jack will be suitable for the the weight of the mjet130?

Click to expand...

Just about , its the same one supplied on Bravo/a, Mareas etc which weigh more.

For piece of mind though I went out and bought a 2 ton scissor jack and have it in the spare wheel well along with my spare mjet wheel, wheel brace etc.

If your not built like a brick sh*thouse then you may find a decent brace rather than that POS that FIAT give is more useable.