I've been looking for some new wheels for my new GPS. the wheels I've found only come in two ET fitment options, these are:

18 x 7.5, 4 x 100, +45 or

18 x 7.5, 4 x 100 ,+48

will ether fit?

BTW my cars lowered roughly 30mm all around (coil overs).

Wheels in question:

you should get them on with wobbly bolts as the pcd is 98 but there 100! not sure what the +45/+48 standards for give them a bell...

the grande is 4 x100

Mine are 17's and are 4x100 and 48's.

Hope this helps.

Oh and I'm lowered 40mm

18 x 7.5, 4 x 100 ,+48 - Should fit.

Those alloys look like the average ones you'd see on a £600 fiesta though. Would hate to be your GP:nutter:

actually older GP are 4x98pcd and later are 4x100pcd! Take one of your wheels off the pcd ull be printed on the inside of the rim some were!

there plenty other thread about it on here

Only a few of the early gps are 4x98. Either of those fitments will be fine. Can always get spacers on them to push them out if you wanted.

fenton_jd said:

18 x 7.5, 4 x 100 ,+48 - Should fit.

Those alloys look like the average ones you'd see on a £600 fiesta though. Would hate to be your GP:nutter:

Click to expand...

cheers for the help. I know what you mean about the design. i really like them but they do look a bit cheap. looks like i will have to save for oz ultra leggares (sp) in graphite

Id go for the ones that are ET 45 so they sit out in the arches a bit more