hey people, just wondering what you think about the lip for the front bumper....ive got a black GP sporting 1.4 16v, think its worthwhile or waste of monies?
cheers!
cheers!
Styling Front bumper lip, yes or no??
- Thread starter Obrooks
- Start date
Currently reading:
Styling Front bumper lip, yes or no??
Looks good on a black car
Is that a Leon Cupra job?
It looks it, and if so at £25 can't go wrong reallY!
It looks it, and if so at £25 can't go wrong reallY!
smifton
Member
Is that a specific one for the GP? what about the Seat Leon splitters? Nearly buying one of these.
OP
OP
cool, might get it, £40 on ebay, might try get it cheaper though,only a piece of plastic!
If it is a Leon one you can get them from Seat dealers for well under £30. Closer to £25 i believe!
OP
OP
on the ebay store it doesnt really say, check it out...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=140256278959&Category=72209&_trksid=p3907.m29
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=140256278959&Category=72209&_trksid=p3907.m29
This post contains affiliate links which may earn a commission at no additional cost to you.
OP
OP
sweet, cheers for that, never really knew, just came across it on ebay! you need to modify the leon one to fit the GP?
To me it looks Leon style vut to fit the GP.
2 options really pay a bit more for the straight fit one or get on a bit cheaper and modify it too fit!
2 options really pay a bit more for the straight fit one or get on a bit cheaper and modify it too fit!
A chap I work with put a Leon one on a MGZR didn't take much to make it fit just a little trimming here and there
OP
OP
brill might nip to seat dealer at weekend and get myself one. how are they fitted? clips? i think on the ebay page for that one it says some modification may be needed so probably not made just fo GP. what do i ask for when i go to seat? sounds noobish i know lol
I can't promise but I think the part no. is: 1ml805903
OP
OP
sweeet, will ring seat on my lunch me thinks, hows it fitted?
I'm really not sure mate sorry
OP
OP
fair enough, cheers anyhoo!
OP
OP
cheers!
vagosofron
Member
It is really easy to fit.I did it in 30 min with a friends help.If you can get a m8 to help you then it's just 30 min to 1 hours work!And it looks sweeeeeet!
OP
OP
It is really easy to fit.I did it in 30 min with a friends help.If you can get a m8 to help you then it's just 30 min to 1 hours work!And it looks sweeeeeet!
have you screwed it to underside of your bumper? or is there another way of fitting it?
- Joined
- May 25, 2006
- Messages
- 16,219
- Points
- 2,029
Its a cupra splitter. Dont buy off that guy he is tearing you a new arsehole if you pay that much for it. As said just go down to your local Seat dealer and order one from the parts department.
