OK.... keep hearing bout this ECU fed Tachometer for the Mk2 punto.
Is it true that i have to tap into the ECU for a feed to the rev counter as the punto has 2 coils. Fiat mechanics don't even know whats going in with it, surely a model that as been fitted with the (tach in te dash) will have a wire going to somewhere, no-one happens to know how the read the wiring schematics on the haynes manual do they??

Cheers

Chris

what you trying to do fit a rev counter dash to a lower spec non-rev counter car or fit an aftermarket tacho ?

you only have to take a feed from the ecu on the mk1.
on the mk2, if you were to take a set of dials from say a sporting, the tacho would work on your car. all you would need doing after that is to get the milage adjusted :wink:

...true but that takes the fun out of having a nice shiny tacho on the pillar.
i cnat seem to find anything on the net that tells you how to fit and aftermarket one to the mk2, and trust me i'be looked. Stuck on this damn building site :twisted: :twisted:

...true but that takes the fun out of having a nice shiny tacho on the pillar.
i cnat seem to find anything on the net that tells you how to fit and aftermarket one to the mk2, and trust me i'be looked. Stuck on this damn building site :twisted: :twisted: