1.2 EXHAUST SYSTEM HELP

Currently reading:
1.2 EXHAUST SYSTEM HELP

Thanks a lot for the response Ant.

Im fairly new to the world of modding so was wondering if there's any exhausts that stand out from the rest or ones that i should avoid?
Also wondering what sort of price i should be paying for someone to fit it?

Cheers mate.
 
where u based, there is a few what will make it to ur spec, ie blueflame, powerflow, there based all over the country,

im from wigan and i always use dan mar in orrell, prices vary from £300+

for instance you can tell them u want it to sound like a subaru an they will get it as near as they can or u want it to sound standard but with bhp gains

1242761040.GIF
 
I'm just outside Oxford but not too fussed about travelling to get the job done.

Im thinking of getting a twin exhaust but with single pipes split each side, would something like that be covered in the £300 or would it be much more?

Yeah im looking for something with better bhp gains firstly and then a tasteful tone ;)

Cheers.
 
James,

you'll only waste time and money on a 1.2 buy changing the centre pipes. A full 4 branch manifold will gain most improvement as will removel of the cat, but thus not advised for MOT reasons(+ if you can get one too). A universal backbox is your best bet for sporty sounds and looks, but you'll not gain any power increases on a 1.2.
fit a k&n panel filter, and do a direct air feed from front bumper (ram air) and that'll gain you a couple bhp, but thats all. An ecu remap will prove slight more bhp results.
 
prob about 450 to 500 go on powerflow and look for your nearest dealer
or a company called top gead in oxford , try them they do custom work

1242761040.GIF
 
for non chavvy sound forget the sportex, its like a drain pipe and noise maker only, plus the quality of their kit is not really all that good either.

Personal preference was the Ragazzon system for me (had a 1.2 for 4 years) they are pricey, but they have a really nice exhaust note (raspy with a bit of a burble, but nothing ott is any way) and also, the quality of the kit was superb!

if you manage to get your mits on a supersprint manifold (the Punto ones dont fit) you will be one of the lucky ones, i looked high and low for 3 years and never found one at all...

Andy_sx
 
i have group n rally cams in my hgt with a ecu remap from abarth italy , it was done through a company called avanti motorsport.

c&b cams will be good but you will have get a piggyback ecu

there will be good bhp gains ,



1242761040.GIF
 
I have a full cat back stainless steel exhaust for swapping, it is built for a 1.8 though so no idea if it'll fit
 

Similar threads

J
Replies
0
Views
673
jason
J
J
Replies
0
Views
307
John Schmidt
J
W
Replies
0
Views
657
wakka
W
I
Replies
2
Views
747
Dark Lurker
D
Back
Top