Hi,

Does anyone know how to remove the rear seats of a Bravo SX80, because ive tried undoing all the bolts that i was told to undo but they just wont budge.

Is there anything else that i can do because i dont want the weight of the rear seats in the car as i dont use them atal.

Any help apprechiated,

Thanks

easiest way to do it

5 or 6 mm allen key

along the bottom edge of the bench (the bit your arse goes on) there are 3 brackets with an allen key bolt in, undo those and the bench comes out!

uprights

you need a torx bit for this idealy (cant remember the size off the top of my head, 35 - 40 i think)

lay the rear seats down so they are flat. pull all the plastic plugs out and remove the fabric covering the back. undo the 2 torx bolts (one on each seat) that have the cargo net securing loops on, then remove the backing. then you need the torx bit again and undo the remaining 3 bolts per seat and the uprights come out.

then its up to you if you remove the hinges and rear door cards etc..

Andy_sx