cluch drops the rpm

Currently reading:
cluch drops the rpm

A

Alex

Guest
Hi i own bravo 1.6 97'
i have very strange problem when i press the cluch the motor rpm falls down to 500-600 rpm
and some times the engine even goes off at all
any ideas what can it be?
 
How does it bahawe in neutral ?
sounds like ICV

svenjtd.jpg

Members Site - - - - - - - My Site
 
there is a little thin rubber pipe that goes from the top of the engine(injection manifold) to the centre of the bulk head at the back fo the engine bay. if this pipe is damaged or disconnected it will be the cause of what your describing
 
on neutral it's ok

it bahawe's ok in neutral the rpm drop occures only when i apply the cluch pedal
 
the vacum ok ether

the cluch is total mechanical it's have no connetion to hedrawlics or vacum
it runs ok in neutral every thing is ok,
can it be the pressure bearing of the cluch?
 
Ash, if the MAP pipe had come off the car would barely run at all.

Get someone to push the clutch pedal while you watch the crank end pulley (where all the belts are) and see if it moves sideways.
 

Similar threads

Back
Top