Hello everyone - I am looking for some advice.
I have looked the the various threads on problems with side lights - but no luck so far. My problem falls into the category of side lights not working on the passenger side but are working on the drivers side.
The lights not working are the two orange side lights, rear lower side lights, passenger side hand number plate light and passenegr top left hand light.
I know all lights work because if I connect side lights from driver side to passenegr side the two orange and top light work. Also if I connect drivers side number plate light to passenger side number plate light then the numberplate and lower side lights work
I have swapped fuses F12,F13,F24 and the result is still the same. There is 12V to each of the fuses.
So I am looking for some advice as where the wiring looms run from the back of the CFB fuse box through to the Passenger side lights so that I can check the coonectors etc.
There is no 12v to any of the lights. All earth connections show continuity when I check back to earth chasis.
Any help would be appreciated.
I know that if I wire from the drivers side to passenger side then I can get everything working but really like to understand where the problem is occuring.
Thank you
I have looked the the various threads on problems with side lights - but no luck so far. My problem falls into the category of side lights not working on the passenger side but are working on the drivers side.
The lights not working are the two orange side lights, rear lower side lights, passenger side hand number plate light and passenegr top left hand light.
I know all lights work because if I connect side lights from driver side to passenegr side the two orange and top light work. Also if I connect drivers side number plate light to passenger side number plate light then the numberplate and lower side lights work
I have swapped fuses F12,F13,F24 and the result is still the same. There is 12V to each of the fuses.
So I am looking for some advice as where the wiring looms run from the back of the CFB fuse box through to the Passenger side lights so that I can check the coonectors etc.
There is no 12v to any of the lights. All earth connections show continuity when I check back to earth chasis.
Any help would be appreciated.
I know that if I wire from the drivers side to passenger side then I can get everything working but really like to understand where the problem is occuring.
Thank you