Technical Fault Codes po401 and po402

Currently reading:
Technical Fault Codes po401 and po402

Joined
Nov 12, 2016
Messages
141
Points
120
Location
Preston
This info is for whine0 message in box is full i didn't fancy typing all this info out again lol

PO402-61 Air Quantity Control PO401-61 High Pressure EGR Valve Blocked

engine speed 2326 rpm 1805 rpm
bat v 14.377v 14.406
intake air quantity 776.5 mg/i 694.5 mg/i
desired air intake quantity 2951.5 mg/i 2481.0 mg/i
engine temp 84c 60.5 c
low pressure egr position 4.59mm 4.72 mm
low pressure egr target position 4.69mm 4.82 mm
boost pressure 1439 mbar 1258 mbar
desired egr position 0,000mm 0.000 mm
actual egr posistion -0.018 mm 0.021 mm
air temp boost manifold 26.00 c 20.0 c
total fuel quantity 31.92 mm/i 33.32 mm/i
throttle position 11% 11.94 %
air quantity control Disabled Disabled
Particle filter regen OFF OFF
EGR éxchanger exclusion Valve OFF OFF


1st set of readings are for PO402
2nd are for PO401
 
Last edited:
Back
Top