General Ducato Indicators

Currently reading:
General Ducato Indicators

Alan2361

New member
Joined
Feb 10, 2019
Messages
3
Points
1
Hi everyone, this is my first post ever on any Forum. I have a Ducato Motor home 2006 and the indicators and hazards do not work. I have checked wiring and fuses etc. Does anyone know where to look on the vehicle or does anyone know where to get a wiring diagram for the indicator/ hazards.
Thanks

Alan
 
is it an X250 variant? If so the indicators are controlled by the Body Control Module. I have attached the functional description.
 

Attachments

  • Indicators Functional description.jpg
    Indicators Functional description.jpg
    208.3 KB · Views: 83
Thank you RayC, I will read and digest.
Further to my first post the vehicle is a Ducato Motor Home, 56 plate registration, 2800cc Diesel, engine code 8140.43S

Regards

Alan2361
 
Last edited:
Hi all. I have a Ducato motor home, 2800 diesel, 2006. The indicators have stopped working. I have checked wiring and fuses. Anyone got any ideas. Does anyone know where I can get a wiring diagram.
Thanks

Alan
 
He Alan,, yours will be an X244 then , (2.8JTD) I have an 05 one under my Bustner. There are manuals to download on here, (eLearn) and these should have wiring diags in them,,,,,I say should, but you know, some bits ain't there.LOL. There wil be someone here who will assist very soon, this a good forum, I have found it is one of the best, and, the regular helpers in the Ducato section, contains a high proportion of Fiat trained blokes, AFAIK. Sit tight.........
 
I just re downloaded the eLearn disc image files,, it seems part 5 is corrupt, I have always had trouble with these files on download, and it is not simple to install and get working. You need to be adept at using a virtual CD drive and working with .iso images, its a faff, but doable.
 
F01, F37,F53 are mentioned in manual,, the wiring diag. is missing from my download! Several descriptions of the circuit are there tho'.
The locations of the various connectors is not stated which doesn't help. Typical.
 
I just re downloaded the eLearn disc image files,, it seems part 5 is corrupt, I have always had trouble with these files on download, and it is not simple to install and get working. You need to be adept at using a virtual CD drive and working with .iso images, its a faff, but doable.
7zip to assemble the files into one completed archive

And if you are windows 10 it can mount files natively by right clicking and pressing mount
 
hi this might be to late but try spraying the hazard switch first with wd40 elec cleaner then press it in and out . happen to me in France
 
Back
Top