Anyone tell me/show me picture/diagram to let me know where the indicator relay is located on my 2005 Ducato motorhome. Im aware there are 3 fuseboxes .The indicators dont work but hazard lights are not affected as covered seemingly by separate relay. Many thanks in advance.

If Iv seen this prob before few year ago if my memory serves me the hazard switch is faulty causing the stalk not to work even though hazards work ,can you get a cheap hazard switch unit to try

Hazard switch is built into a unit with openframe relays soldered to the pcb it has a really wimpy pcb connector on it so I would start with cleaning that with decent contact cleaner you need to take out the radio to access it.

ive got nearly the same problem but i dont have either the hazards or indicators, ive put a new switch block in and still nothing,,,,, so any advice would be handy .....

Has anyone solved the problem of no indicators and no hazards working on a 2006 fiat ducato 2.8,
Where is the flasher unit / Ralay fitted,is it part of the hazard switch or in one of the fuse boxes or elsewhere.
Thanks

Tramp2140 said:

Has anyone solved the problem of no indicators and no hazards working on a 2006 fiat ducato 2.8,
Where is the flasher unit / Ralay fitted,is it part of the hazard switch or in one of the fuse boxes or elsewhere.
Thanks

Click to expand...

A 2006 2.8jtd is an x244 model, (2002 - 2006). On the x244 the hazard flashers and direction indicators are controlled by the "Switch Control Panel" (H090). This is a typical "black box" with no information about its internal workings, but the internal logic does affect many items. The panel is located at the rear of the auxilliary switches below the radio, which must be removed for access.

See attached annoted copy of eLearn diagram E2020, my own table of switch control panel connections, and colour code translation.