Hi,
I have a 2012 X250 2.3 multijet 130, I think it is Technico spec, so has aircon and front fogs. Well I say front fogs, it is front fog really, as one was missing when I got it, a result of some damage to the drivers sider lower bumper corner. I got a bumper corner new from local panel firm, it needs the fog hole trimming out, and I got a new fog from ebay. It is a sort fo flattened off round lamp with a single threaded bar hanging off it to bolt to bumper I presume. However, I can see no where on the bumper corner nor the old bumper corner where such an appendage would bolt to! No where near!

Has anyone had bumper corners off and can remember if there is any other sort of bracket that I need. I can see two bosses for self tapping style screws at sort of 2'oclock and 8 o'clock positions relative to the fog light aperture, in the bumper. But cannot see any schematics or part numbers for any bracket that I may need to screw into these, to then bold the fog lamp to.

Anyone know or have any photos / schematics?

Cheers

May sound silly and obvious, but,,,,,
if there is one on the other side, have a look there.Might be a bit of a pain to start stripping that side, but you would at least get an idea of exactly what you need, (assuming left and right are not different) and take pics too in case you need them. I assume both parts are genuine fiat- sometimes brand x lamps are sold willy nilly by some as fitting a specific vehicle, when they are to varying degrees different.

Should have said, the van is in the workshop over the weekend so I don't have access to it!!
All the fogs genuine and copy look the same, so I think it is another bracket I need. Fiat dealer so far no help at all!

If you can download the manuals from this site, you may find what you need?

I cannot see the manuals but bodyshop guy I know reckons there is a bracket a bit like a "box" that sits over the rear of the numper aperture, that the fog screws into, the M10 bolt that hangs off it, is apparently not used on the Ducato.
Does this ring a bell with anyone, and if so can anyone find or know of a part number. Again, local fiat dealer so far is no help.