(T) Doblo 1.3 multijet oil filter

Hello I can finally include the link,
The engine drain plug is in the engine sump under the shield which protects the bottom of the engine this can be taken off in about ten minutes.

The oil filter is in the front of the engine next to the oil filler cap, covered by a black metal guard. It comes off easily with an extension on the socket, (1 10mm nut and 2 T-30 Torx bolts) Then put a 27mm socket on the plastic filter cover and unscrew.

I could have left the guard off but its easy to put it back it must have a purpose? same with engine shield you could make a hole in it? but it comes off in under 10 minutes so do the job correctly.
photo's how to change oil and filter

why not just put it in the guides section (pics hosted on FF please) insteard of 5 posts?

Just a quick note to everyone...

If you have a question that is different from the original question of the thread, then please start a new thread. Not only does it make reading it easier, but when you come to the forum and do a search on a question before you post, you are more likely to find a thread that answers your question.

Topic has been split...

Thanks for your co-operation...

many thanks for the info - well worth waiting for

hi new on hear & want to no what oil is best to use in my doblo 1.3 multijet please ??
& also does it have a timing chain fitted ??
& what about dpf filter its a 2006 if any one coul help please thanx ?

chain