Technical Towbar wiring

[snatch69]

got the tow bar fitted easy , please can someone supply me with an idiots wiring guide, thanks

 

[snatch69]

also is there a predrilled hole with gromit in or do i need to make my own, thanks

 

[Hellcat]

What sort of wiring do you need? single or double socket?

 

[snatch69]

just single , thanks

 

[Hellcat]

Didn't you get a guide with the kit?

Got a buzzer unit?

There are a few diagrams which may be of use here:

http://www.watling-towbars.co.uk/towbars.html

 

[snatch69]

yes i got a buzzer,no guide(thats ebay for you!) thanks for you help

 

[snatch69]

its actually the fiat wires which lead to the lights that i need the info on, what colour is what , i have information for the connector wiring, thanks for you help anyway

 

[snatch69]

or are these the same colours for all cars and the same as the wire in the power connector?

 

[Hellcat]

When I did the Marea towbar I just opened up the light clusters and traced the wires back. Had to bring 2 wires across from the left hand side for the left tail and left indicator lights. Foglight was on the right so seemed sensible to make all my connections there.

 

[T14086]

Theres a rubber grommet just behind the near side bumper section (under the rear lights) you can pass the wires through here & also connect them to the tail light wiring from here,you will of course have to run a single wire across to the offside light cluster for the right indicator.

 

[Hellcat]

Theres a rubber grommet just behind the near side bumper section (under the rear lights) you can pass the wires through here & also connect them to the tail light wiring from here,you will of course have to run a single wire across to the offside light cluster for the right indicator.

You're supposed to run one from the right hand tail light too..

 

[snatch69]

cheers chaps, thanks for your help

 

[snatch69]

do i have to fit the buzzer?

 

[T14086]

You're supposed to run one from the right hand tail light too..

Nah just join up the black/brown 7N socket sidelight wires then connect to nearside tail light then just up the fuse for that sidelight from 7.5 to 10Amp.If theres a quicker easier way i'll find it

 

[moonxx]

Hi i have a doblo multijet diesel seater and want to fit a tow bar. It's not the hatec but split doors like the van. Do i need a 7 wire relay with tow bar and what make would you recomend cheers

 

[sludgeguts]

My experience...
https://www.fiatforum.com/doblo/116217-towbars-here-we-go-again.html

I've put the main points up in the guides section.