Hi,

I've been a member since 2014 but had to setup a new account as I was locked out

Need the 'hive' mind on this one.

OK, my Doblo has an EGR error: P490 & P487, see below.

Before I start pulling the EGR valve I thought I'd try to spray some EGR cleaner.
I disconnected the large hose going into the air filter box & sprayed the EGR cleaner into this, does anybody know if this will actually find it's way to the EGR valve & sensor????

I know where the EGR valve is at the back of the engine, very awkward to get to!!

Does anybody know where the EGR sensor is located??

Appreciate any help


Thanks






Car Scanner ELM OBD2
DTC report
Selected brand: [ OTHER BRAND ]

============1==============
P0490
Raw code: 0490
ECU: 10
Status: Pending
OBDII: Exhaust gas recirculation (EGR) system - circuit high

============2==============
P0487
Raw code: 0487
ECU: 10
Status: Confirmed
OBDII: Exhaust gas recirculation (EGR) system, throttle position control - circuit malfunction