I went to start my doblo yesterday, but had no luck. Ignition lights came on as normal but it wouldn’t fire up. Assuming it just needed jumping, I attached my jump pack, and tried again. It still didn’t work and didn’t sound like the starter cranking at all. Knowing next to nothing about cars, I looked up my problems and concluded maybe the starter motor needed a knock to at least get it going so I can take to a garage. So today I put the keys in and switch the ignition on, everything comes on, lights, radio, wipers so I go to start it, nothing. Then when I turn the ignition on the 2nd time, the lights start to flicker and the needles jump up and down as if the electrics are flicking on and off. So I connect up the jump pack again, which seems to give enough juice for the lights to come on and the system check to start...when I do this I now get EBD failure and ABS failure appear. Without the charge pack connected it goes back to just flickering. So after looking on this forum it seems a likely issue could be down to the connection and cleanliness of the earth and other cables? Or is something bigger at play here.
Asking for general advice, but also attaching a photo in the hopes someone can direct me where to look and try scrubbing?
Asking for general advice, but also attaching a photo in the hopes someone can direct me where to look and try scrubbing?
Attachments
Last edited:
