doblovan12014
New member
- Joined
- Jun 3, 2018
- Messages
- 1
- Points
- 1
Good evening & Hi,
My doblo is not cranking since I have removed the socket on the MASS AIR FLOW sensor and refitted the socket without removing the SENSOR from the orginal fitting. There is no cranking with the key. I had fault code p0089 - fuel pressure regulator 1 performance. I have erased the fault code and try to restart but no response. The starter relay ticks, I can fell with finger and the fuel pump is priming. I tried to start by engaging gears and clutch pressed, but still no response. I put new starter relay. But a bit confused the location of the starter fuse. Battery is full 12.86 volts on my MULTIMETER. Had battery replace last year GENUINE from the dealer.
I tried to start the van but there is no crank at all. Dashboard light remains on including the check engine & glow plug lights. I have checked all the fuses in the fuse box inside the engine compartment.
Please help. Thanks for reading
My doblo is not cranking since I have removed the socket on the MASS AIR FLOW sensor and refitted the socket without removing the SENSOR from the orginal fitting. There is no cranking with the key. I had fault code p0089 - fuel pressure regulator 1 performance. I have erased the fault code and try to restart but no response. The starter relay ticks, I can fell with finger and the fuel pump is priming. I tried to start by engaging gears and clutch pressed, but still no response. I put new starter relay. But a bit confused the location of the starter fuse. Battery is full 12.86 volts on my MULTIMETER. Had battery replace last year GENUINE from the dealer.
I tried to start the van but there is no crank at all. Dashboard light remains on including the check engine & glow plug lights. I have checked all the fuses in the fuse box inside the engine compartment.
Please help. Thanks for reading
Last edited:
