Technical Track rod replacement

Currently reading:
Technical Track rod replacement

creon

Member
Joined
Nov 4, 2015
Messages
71
Points
73
I need new tyres but at the moment the passenger side track rod end is seized, has anyone been down this path on the 1.9 jtd diablo of replacing the track rod end?

The parts are cheap enough but how stubborn might it be to remove from the inner tie rod, and if it won't come off the inner could I unscrew the inner and replace that at the same time?

Is it straight forward? I can then drive to the garage for new tyres and get them tracked.
 
I need new tyres but at the moment the passenger side track rod end is seized, has anyone been down this path on the 1.9 jtd diablo of replacing the track rod end?

The parts are cheap enough but how stubborn might it be to remove from the inner tie rod, and if it won't come off the inner could I unscrew the inner and replace that at the same time?

Is it straight forward? I can then drive to the garage for new tyres and get them tracked.

I used a camping stove to apply heat..
Good enougj for most rusted on parts.

Obviously be wary of fire hazards..!!

You COULD Change the whole assemply from the rack...only £25 in parts.
 
Back
Top