General Drivers door

Currently reading:
General Drivers door

Doblomutijet

New member
Joined
May 2, 2014
Messages
22
Points
9
Hi all,
I have a Doblo mutijet 2007 while driving I put down my door window which is electric when I decided to put it back up the top of the window came out of its track. I know the motor is fine so could the track be worn? has anyone had the same issue?
Thanks
 
Hi,

I can't help much but I had a similar problem a few years ago. I can't remember the detail but it was to do with the bit of plastic and the end of motor drive falling apart.

Can't remember how I fixed it at the time, but it was one of those moments where spares weren't to hand so it got fixed with bits that I modded from one of those oddments box (it come in handy one day....), I kept the broken bits and a couple of homemade tools to help with the job. See photo.

That's my offering!!

Cheers

Ron
 

Attachments

  • DSC04535.JPG
    DSC04535.JPG
    397.1 KB · Views: 15
I had the same. Went with an almighty bang.
On mine it was the white plastic guide that pins into a small hole in the rear edge of the window. Not allowed to post URLs as I'm new on here but if you pm me I'll send you a couple of photos and the ebay link where I got mine from.

I did mine by removing the window surround rubber seal clip the new guide in place with the microscopic plastic pin, (fiddly) :bang: and then refitted the rubber seal guiding the clip into its slot. Easier if there are 2 of you as you need to guide the window up and down and of course if you press the button too long it wants to go all the way:cry:
 
Back
Top