Beelzeburp
New member
- Joined
- Jun 20, 2013
- Messages
- 1
- Points
- 1
Does anyone know the factory toe and camber settings for an '08 Doblo 1.9 jtd (105 hp)
I've had the car 4 years, I had all new tyres and alignment done 4 years ago, I do 12,000 km per year, the rear tyres are still like new, I've replaced the front set at 2 years (24k) and again this week.
The front tyre wear is drivers side inside edge smooth wear down to the limit bars and slight scrub on the passenger side outside edge, otherwise there is very little wear.
Drives straight, brakes straight, no pull, no vibration, wobbles or shakes, steering sits at 12 o clock. The car hasn't been kerbed or abused. I bought the car used so can't be totally sure of it's history, but there's no sign of previous front end damage.
So I'm looking to see if the wear issue is fixable, given the alignment looks ok it's maybe camber? Again if anyone has the toe and camber numbers.
I've had the car 4 years, I had all new tyres and alignment done 4 years ago, I do 12,000 km per year, the rear tyres are still like new, I've replaced the front set at 2 years (24k) and again this week.
The front tyre wear is drivers side inside edge smooth wear down to the limit bars and slight scrub on the passenger side outside edge, otherwise there is very little wear.
Drives straight, brakes straight, no pull, no vibration, wobbles or shakes, steering sits at 12 o clock. The car hasn't been kerbed or abused. I bought the car used so can't be totally sure of it's history, but there's no sign of previous front end damage.
So I'm looking to see if the wear issue is fixable, given the alignment looks ok it's maybe camber? Again if anyone has the toe and camber numbers.