Register Login
im Axle Specialists
Reply
 
Thread Tools
Old 05-03-2017   #1
Join Date: Nov 2010
Posts: 6
Thanks: 0
Trader Rating: 0
United Kingdom 
Doblo Fault P0335

OK need some help if possible 1.9 JTD IT started with lack of power ever now and again so went straight for the MAF sensor even I had no eml unplugged it and drove it that put the light on
So after that I plugged it back in went reset the light but also noticed a fault for cam sensor open circuit it seemed ok for a couple of days then played up again but worse no power miss fire checked same fault code for the cam sensor so I bit the bullet changed the sensor new cam belt the works.
started it up still the same but ELM straight on Code P0335 Crankshaft Sensor fault (now this is where I start to doubt my self did it say cam shaft in the first place but the ELM wasn't coming on)
So today took the crank shaft senor out of my other dobby and switched them round still the same the other car runs fine with the old sensor
now ive run out of ideas bad miss fire fault code P0335 Has anybody got any thoughts
__________________
FIAT Forum Useful Links:
Donate to FF | Buy FF Merchandise | Classifieds | FF Insurance | How-to Guides

1shaggy is offline Reply With Quote Quote 
Old 05-03-2017   #2
Join Date: Apr 2011
Location: Near the M4
Posts: 20,365
Thanks: 722
Trader Rating: 0
varesecrazy has donated!
United Kingdom 
Re: Doblo Fault P0335

Quote Originally Posted by 1shaggy View Post
OK need some help if possible 1.9 JTD IT started with lack of power ever now and again so went straight for the MAF sensor even I had no eml unplugged it and drove it that put the light on
So after that I plugged it back in went reset the light but also noticed a fault for cam sensor open circuit it seemed ok for a couple of days then played up again but worse no power miss fire checked same fault code for the cam sensor so I bit the bullet changed the sensor new cam belt the works.
started it up still the same but ELM straight on Code P0335 Crankshaft Sensor fault (now this is where I start to doubt my self did it say cam shaft in the first place but the ELM wasn't coming on)
So today took the crank shaft senor out of my other dobby and switched them round still the same the other car runs fine with the old sensor
now ive run out of ideas bad miss fire fault code P0335 Has anybody got any thoughts

this JTD thread may be of some help..,
https://www.fiatforum.com/stilo/3365...ng-lights.html

charlie
__________________
FIAT Forum Useful Links:
Donate to FF | Buy FF Merchandise | Classifieds | FF Insurance | How-to Guides

varesecrazy is offline Reply With Quote Quote 
Old 05-03-2017   #3
Join Date: Nov 2010
Posts: 6
Thanks: 0
Trader Rating: 0
United Kingdom 
Re: Doblo Fault P0335

Reading it sounds like that doesn't start mine will just Miss fires and won't rev
__________________
FIAT Forum Useful Links:
Donate to FF | Buy FF Merchandise | Classifieds | FF Insurance | How-to Guides

1shaggy is offline Reply With Quote Quote 
Old 05-03-2017   #4
Join Date: Apr 2011
Location: Near the M4
Posts: 20,365
Thanks: 722
Trader Rating: 0
varesecrazy has donated!
United Kingdom 
Re: Doblo Fault P0335

Quote Originally Posted by 1shaggy View Post
Reading it sounds like that doesn't start mine will just Miss fires and won't rev
sorry , re-read the last line..

I'd be looking at a poor injector, etc to make a cylinder miss like that..

what miles has it covered..??

QUIET in here = if it's a JTD , look in the STILO section,
for JTDm ( multijet) look / search the GP section.
__________________
FIAT Forum Useful Links:
Donate to FF | Buy FF Merchandise | Classifieds | FF Insurance | How-to Guides


Last edited by varesecrazy; 05-03-2017 at 21:32.
varesecrazy is offline Reply With Quote Quote 
Old 06-03-2017   #5
Join Date: Nov 2010
Posts: 6
Thanks: 0
Trader Rating: 0
United Kingdom 
Re: Doblo Fault P0335

Yep ok I was going down that way after reading another post on a ducto I thick they had a broken / shorting
Out injector wire it was the rough running or short that was putting up the P0335 fault not the crank sensor
At all
Cheers Ian
Likes varesecrazy liked this post
__________________
FIAT Forum Useful Links:
Donate to FF | Buy FF Merchandise | Classifieds | FF Insurance | How-to Guides

1shaggy is offline Reply With Quote Quote 
Reply
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump
Similar Threads
Thread Thread Starter Forum Replies Last Post
(T) P0335 Error nuddmann Multipla 2 11-05-2015 20:34
(T) Crankshaft Position Sensor P0335 - where? Su5ie Panda 4 14-01-2014 13:53
(T) P0335 code adlarplant Ducato 1 09-09-2013 20:27
(T) Panda code P0335 Gerard 971 Panda 8 02-07-2013 00:15
(T) 1.2 punto 8v error code p0335 jpunto Punto (Mk2/2b) 3 28-11-2012 23:21