Technical ebd/abs failure coming up on the mulituscan

Currently reading:
Technical ebd/abs failure coming up on the mulituscan

kennystag

New member
Joined
Jan 26, 2011
Messages
51
Points
26
Hi
Can anyone help. I am getting ebd/abs failure coming up on the mulituscan. I am not sure what the ebd is and what the cure would be to sort it out. Any help advice would be very much appreciated.
Cheers
Stag
 
Hi All,
Can any body please tell me if there a fuse or relay for the ABS unit on my 2008 1.9 multijet active high top. Please help.
Cheers
Stag
 
Hi All,
Can any body please tell me if there a fuse or relay for the ABS unit on my 2008 1.9 multijet active high top. Please help.
Cheers
Stag

as usual..we need more info;

do the dash lights come up..do they go out at all..??

can you see the part / serial numbers on the ABS..?? that'll help figure out what system you have..,

It's electrical so MUST be protected by a FUSE..
 
Lights ABS and EBD failure using mulituscan start up they go out. ABS unit part number is 51773386 99750 10.0207 0102.4. Now what can you tell me.
cheers
Mate
Stag
 
Lights ABS and EBD failure using mulituscan start up they go out. ABS unit part number is 51773386 99750 10.0207 0102.4. Now what can you tell me.
cheers
Mate
Stag

ignoring MES,
do they work "normally" on the self-test - before starting engine?

almost nobody looks in the commercial section. :(

I'd post an ABS thread in the TECH section ,
stating the fault codes,
ABS spec,
and a basic description of what you've worked through,

Charlie.
 
I also have ABS light coming on intermittently any ideas will have a scan in the week
 
Back
Top