Technical reset oil condition indicator

Currently reading:
Technical reset oil condition indicator

Joined
May 1, 2010
Messages
76
Points
82
Location
Largs
Hi there. Oil pressure light started to flash on my 2012 doblo cargo 1.3. Stopped and checked handbook. It means oil needs changed. I did change the oil and filter the month before but didn't reset anything. Does anyone know how to reset this without buying expensive gear? john7
 
It needs to be reset as well as the service interval. Same thing happened to me. I used a snapon machine at work but whilst learning how to do it reset my service intervall several times. Its next service is now ib 48000 miles so be careful
Ken
 
It needs to be reset as well as the service interval. Same thing happened to me. I used a snapon machine at work but whilst learning how to do it reset my service intervall several times. Its next service is now ib 48000 miles so be careful
Ken

Thanks for your reply:)
 
Hi, after service my Diesel Doblo 1.9 MJT has come back from the local garage with the service warning still activated. I have the multiecuscan software but I didn't manage to reset this. Any ideas? The garage didn't know how to do it.
 
I figured it out myself.

In mulitecuscan there is a SERVICE module in the system list.

Selecting this allows to enter the module for resetting the service warning light. In my case it was a bit tricky as multiecuscan lost the connection everytime after 10s so I had to practice being quite quick to click to get the job done but I managed it in the end.
 
Back
Top