camshaft change!!! doblo 1.9 jtd 04

Currently reading:
camshaft change!!! doblo 1.9 jtd 04

briscoe700

New member
Joined
Aug 5, 2014
Messages
1
Points
1
Hi, iv bought a doblo and on inspecting the bits and bobs iv noticed the camshaft has snapped on the vacuum output. the vacuum still rotates but will fail eventually so.....I have bought a cam shaft to replace it but I dont want to take the belt off to re time it and all that long winded stuff so my question is..... If the belt is marked up and the old camshaft is marked up, could i pull the camshaft and sprocket from the belt while keeping tension by hand and replace it with out timing it? cheers, Sean
 
I really would not fancy that just in case it slips slightly and causes valves and pistons to meet. Too expensive a risk not to do properly imo.
 
Back
Top