Hi

An employee ran into the back of someone and has done some minor damage which I need to get fixed.

Probably the worst part is the slam panel, I've bent this back into shape and is pretty much spot on but I'm concerned (not knowing what a slam panel is for) that the slam panel is now weakened and wouldn't be able to take another impact, is the slam panel designed to absorb impact?

Looking on eBay I can buy the entire slam panel for less than £100, quick question though:-

1) does it bolt off and on (assuming I buy it complete)

The next bit I need to check, where the slam panel meets each wing it is bolted inside the engine bay to a piece of metal which runs alongside each wing, towards the front it has 2 x 90 degree bends and at the top (2nd 90 degree bend) the slam panel bolts to it.

2) can this be just straightened out?

The only other bit I need is a couple of headlights as the clips have broken which hold them in place

Thanks in advance

Can't give you defined answers but might worth your while having look on ePar to view the exploded diagrams for indications of how it goes together.
Click on the ePar link in the tool panel at the top of the home page above

Sorry fella - it should read ePER