Please help. I have a 1.9 JTD doblo (2002) with an airbag fault.
I recently had the time clock resetting to zero on cold wet mornings. Then battery was flat once. At some point the dreaded red air bag failed symbol came up. Got battery checked with a load tester and confirmed it was on it way out. Changed battery.
Air bag fault still there.
Connected up multiescuscan and confirmed following errors that will not clear:
----------------------------------------------
14 passenger air bag exclusion switch -Plausible - intermittent - 4 (this is a new fault in last couple of days)
01 Control Unit fault - unknown/ internal - intermittent - 193
05 passenger airbag off lamp - unknown/ no power supply - intermittent -49
1A Airbag control light - unknown/ no power supply - intermittent - 49
02 ECU supply voltage - value too low - 69
----------------------------------------------
Have taken apart connectors to battery, cleaned them (abrasive paper) re-connected them
Have undone black earth cable to back of gear box, cleaned, re connected.
Have examined passenger airbag switch, looks ok.
Still errors will not clear.
I cannot find the ECU to check connections. Any ideas ?
I recently had the time clock resetting to zero on cold wet mornings. Then battery was flat once. At some point the dreaded red air bag failed symbol came up. Got battery checked with a load tester and confirmed it was on it way out. Changed battery.
Air bag fault still there.
Connected up multiescuscan and confirmed following errors that will not clear:
----------------------------------------------
14 passenger air bag exclusion switch -Plausible - intermittent - 4 (this is a new fault in last couple of days)
01 Control Unit fault - unknown/ internal - intermittent - 193
05 passenger airbag off lamp - unknown/ no power supply - intermittent -49
1A Airbag control light - unknown/ no power supply - intermittent - 49
02 ECU supply voltage - value too low - 69
----------------------------------------------
Have taken apart connectors to battery, cleaned them (abrasive paper) re-connected them
Have undone black earth cable to back of gear box, cleaned, re connected.
Have examined passenger airbag switch, looks ok.
Still errors will not clear.
I cannot find the ECU to check connections. Any ideas ?
Last edited: