doblo would not start today turning over fine tried many times engine never made a hint off starting, then out off the blue it started has anybody got any ideas
thanks

check glow plugs

I had similar problem a couple of weeks ago, mine turned out to be the crank sensor.

fronteratech said:

check glow plugs

Click to expand...

I'm reliably informed (2 independant & good mechs) that unless temps are well below freezing, the only thing the glowplugs are good for is stopping shedloads of smoke belching out at startup. And as there is a known problem associated with trying to part glowplug from doblo, it's best to leave them alone.