Technical Doblo front door panel removal help

Currently reading:
Technical Doblo front door panel removal help

Bolton Doblo van

New member
Joined
Jan 9, 2009
Messages
2
Points
1
Please could somebody help me - I can't for the life of me find a way to remove the door panel on my Doblo van. I would like to fit new speakers in the door but I'm stuck. I've removed all the alan screws and door lever screw but that's as far as I can get.

Any help would be much apprecieted

Thanks:confused:
 
Please could somebody help me - I can't for the life of me find a way to remove the door panel on my Doblo van. I would like to fit new speakers in the door but I'm stuck. I've removed all the alan screws and door lever screw but that's as far as I can get.

Any help would be much apprecieted

Thanks:confused:
hi, mines a 2004 jtd 5 door so it may be different from yours, but hear goes, the 3 bolts holding the door pull on as you know needs removing, the padded arm rest needs removing as well, because there are two more bolts underneath, simply pull it awyay from the door panel, you will see two more bolts underneath, dont forget the self tapping screws on the bottom of door panel, i think there are 3 screws , remove them, it should then pull away, there are some retaining clips behind the panel (plastic plug and socket type) be careful not to snap them, i swapped my speakers the fitted ones are dredfull! regards, geoff. p.s if yours is the facelift model (late 2005/2006) it will be different from mine.
 
Thanks for that I'll have another bash later although I think mine is different - It's an 08 reg.

cheers
 
I'm in the same position as yourself. ( facelift van ). After removing the screws that you mentioned you need to prise the bottom and sides of the panel away so that the plastic plugs come free. I have got that far, but something is still holding the top of the panel in place. ( not the mirror adjuster cover I have removed that.)
If you get any further can you post the solution.
Cheers
 
Ok cunningly there's a third allen bolt under the electric window switches. Lever out the switches from the front edge, then undo the bolt. Youve already found the two allen bolts under the handle, remove those. Remove the cross head screw under the door release lever and loosten the one by the mirror adjuster. Then there are white plastic plugs all around the panel which just need to be leavered off with a long screwdriver. Chances are some will pop out of the panel and remain in the door, these need to be pulled out and put back in the pannel before replacing. Watch the metal plate that holds the speakers as it has very sharp edges! Blood everywhere here! Good luck.
 
Okay Guys, I have a 2008 facelift model and need to change the speakers in the door panels without breaking anything.
So far I have removed, wing adjuster screw, allen behind window switch, both allens under door pull and self tappers (2) inside door pull. Nothing moves, is there anything else I need to undo before I start popping the plastic plugs? The armrest on the facelift appears integral to the panel.
Any help appreciated, Thanks.:confused:
 
why? they dont even burn very well.haynes was the business 20 year ago,they cant tell how to remove even a door panel now.save your money and your hair.
 
Please could somebody help me - I can't for the life of me find a way to remove the door panel on my Doblo van. I would like to fit new speakers in the door but I'm stuck. I've removed all the alan screws and door lever screw but that's as far as I can get.

Any help would be much apprecieted

Thanks:confused:

Hi I also want to change the stock speakers in my Doblo Cargo SX Maxi van 2011 model.
I cant work out or find out how to remove the door panels.
Does anyone out there know what to do?
There are tweeters on a separate small panel on the door corner which also houses the door mirror switch. Does this pull of somehow?
The standard Bluetooth car radio is integrated with the sat nav and steering wheel controls etc, so cannot replace the Head Unit really.
But would consider also installing an Amp as well as new speakers.
I think the speakers are 13cm.

Thinking of installing Alpine speaker kit:
ALPINE SPR-13S 5-1/4" (13cm) COMPONENT 2-WAY SPEAKER
www .dynamicsounds.co.uk/alpine-spr13s-13cm-component-2way-speaker-p-846.html

Any help is welcome.
 
New 2011 Doblo sound system

Hy All

I am having the same ( a bit deeper ) problem.

I want to change ALL and i cannot find any info on how to expose the speakers, tweeter, wiring routes on the NEW Doblo. Everithing i find is for the old one.

Also i would gladly accept suggestions for a small enough amp to conceal inside the panels (ie where the jack pouch is) and a small enough SobWoofer to hide as well.

Planning a complete Sound makeover. :slayer:

Thanks

Best Regards,
Alex
 
Thanks so much to Johnhififan - the cunningly hidden bolt under the window switches was absolutely crucial! I have added a set of photographs of the removal process on flickr (it turns out that I cannot post links yet since I have only just subscribed which is fair enough - just search on flickr for fiat doblo door removal) I added notes, which pretty much overlap John's comments.

I'm not much into DIY/Mechanics so this was a challenge! lol. Even when I had removed all the screws and bolts the door panel still is very much solid, which left me thinking what do I do next?! I found that using a long screwdriver as John had suggested working from the bottom right upwards levering the white plastic plugs out (which by the way until you have most of the door off you cannot see - but I hope my photo record will show the plug mounts to give you an idea where to start.

I this helps anyone else with a similar need to remove the door panel! Great forum, thanks all!
 
Back
Top