amk100
New member
I have a doblo 2006 model and the clutch is starting to slip at 42000 miles i had to have a clutch master cylinder and before i had to change this cylinder i am sure it was not slipping before the cylinder snapped at the pedal as it is only plastic so this was replaced but could not work out how to release the air out of it as there is no bleed nipple so just slightly undone the hose with pressure got out as much air as possible connected it back up and from then on its been slipping slowly anyone have any ideas
where to look to buy this clutch ?
who can fit it
what sort of cost i should be looking at?
anyone fitted this type before in a 2006 model 1.9 jtd
please not fiat dealers as the one we have in bristol is S!!T
please recommend only if you have had this work done
thankyou
andy :bang:
where to look to buy this clutch ?
who can fit it
what sort of cost i should be looking at?
anyone fitted this type before in a 2006 model 1.9 jtd
please not fiat dealers as the one we have in bristol is S!!T
please recommend only if you have had this work done
thankyou
andy :bang: