Hi was just wondering if anyone knew of a cylinder head with 16/24 valves that would go onto a croma turbo ie block and line up with all oil and coolant lines as well as just fitting on in general.
I have a fiat croma turbo ie and am looking to replace the turbo but dont want to do it unless i can get some 16v camage going on at least.
Atm it is a twin cam 8 valve one cam for exhaust one for in:slayer:take.
Ta

-just found out theres a 2000cc ie 16v croma so im going to try track one down.

None of the old shape Cromas had a 16V engine. You can fit the Thema/Integrale/Coupe 16V head to the Croma block. On the Croma block you need to plug the oil feed holes to the head, leaving just the rear two (i.e. at the flywheel end). This then matches the oil galleries in the 16V head.

Of course, if you really have a hankering for 24 valves, fit an Alfa V6 24V engine! Yes it will fit.

Being in Christchurch, I'm surprised you're asking this question here! The place for you is the Turbo124 forum (not that I'm denigrating this excellent forum!!!)...

http://www.turbo124.com/forum/index.php

Heaps of 16V conversion help to be had there.

Cheers R

Yeah i've found a 96 thema head. THanks for the link to that place