Technical Help! Fiat Coupe Brembo wont bleed.

Currently reading:
Technical Help! Fiat Coupe Brembo wont bleed.

LingLY

New member
Joined
Nov 9, 2016
Messages
4
Points
2
hi all,

I'm new here.. I've been owning my fiat coupe 20VT for about 2 years now, recently i encounter an issues with my front brakes. when braking my car tends to pulls to the right. it feels that my right brembo brakes more than the left causing it to pull to the right. so i took out the pads clean up the brakes. than i tried to bleed the brakes because it was never bleed before. i bleed the right first with no issue. but when it came to left, no fluid came out from both nipples. i took out the incoming steel line entering the caliper (while someone was pressing the brake paddles) there was no fluid coming. has anyone encounter this before? :bang: now im stuck. and my car been lying around for about 2 weeks now.
 
hi all,

I'm new here.. I've been owning my fiat coupe 20VT for about 2 years now, recently i encounter an issues with my front brakes. when braking my car tends to pulls to the right. it feels that my right brembo brakes more than the left causing it to pull to the right. so i took out the pads clean up the brakes. than i tried to bleed the brakes because it was never bleed before. i bleed the right first with no issue. but when it came to left, no fluid came out from both nipples. i took out the incoming steel line entering the caliper (while someone was pressing the brake paddles) there was no fluid coming. has anyone encounter this before? :bang: now im stuck. and my car been lying around for about 2 weeks now.

is the brake fluid still clean.. if dirty..you've a chance that there is a blockage.. ( is your version with ABS..??)
 
is the brake fluid still clean.. if dirty..you've a chance that there is a blockage.. ( is your version with ABS..??)
yeah. its comes with ABS.. the fluid isnt so dirty.. i'm guessing there is a blockage too.. is it possible if i open the line to the ABS unit and use compressed air (6bar) to flush it through.. has anyone done this?
 
yeah. its comes with ABS.. the fluid isnt so dirty.. i'm guessing there is a blockage too.. is it possible if i open the line to the ABS unit and use compressed air (6bar) to flush it through.. has anyone done this?

I've thankfully never had to fiddle with ABS equipped systems,:)

removing lines and checking them individually is probably fine,

however I THINK you need to activate the ABS pump when refilling / bleeding?,

A software program could be VERY useful for this..??
MultiECUScan(y)
 
My bad, I was referring to the caliper pistons:D Where did I get cylinders from. It was early when I posted...;)
The pistons aren't stuck for sure. each sides has two pistons. whenever i compress one the other moves out. should be a clog i supposed. will try to get it the line out this weekend and flush it through with compressed air. see how it goes. the big question,do we need to activate the ABS pump when refilling / bleeding? i'm not sure about this.
 
Back
Top