Universal Cruise control kit with accelerator loom suitable for Fiat Panda 2012 onwards.
This kit was bought from Conrad Anderson and was fitted to my 2013 Fiat Panda 0.9 Petrol, but i think it will work on any fiat panda 319 from 2012 onwards.
This kit is currently still selling for £350.
It makes motorway journeys and longs drives much more enjoyable.
This is labelled as a Goldcruise GC90, but this is now sold as a LiteOn AP900
The only vehicle specific part here is the accelerator cable linkage. If you can rewire this or source the correct cable this kit could be made to work on any vehicle if you reconfigure as required.
To work on the Fiat Panda you need to plug this unit into the accelerator pedal wiring and then connect it to 12v (available on the back of the radio), and connect it to the 2 CANBUS lines at the back of the OBD socket.
The control unit can be mounted next to the electronic steering module on the Panda - which is visible/accessible when you remove the OBD socket cover
This cruise control kit comes with
* Main control module - Goldcruise GC90i - this should be mounted near to your OBD socket and needs a 12v supply (I used one from the back of the radio) along with CANBUS LOW/HI connections (can be made to the wire going into the back of the OBD socket). It uses the CANBUS lines to get brake, clutch and speed status.
* Control Stalk - Goldcruise GC3 - this stalk can be mounted to your steering column cowling and lets you set/resume the cruise and adjust the speed up or down. It has an indicator light on that tells you when it is active.
* Accelerator pedal cable for Fiat Panda 2012 on - this cable simply plugs into the back of the brake pedal and intercepts the accelerator wiring so that the unit can control the acceleration for cruise.
* Original instruction manual. This is available online if you search for "Goldcruise GC90 manual"
Please message me if you have any questions and i can try to answer them or send more detail
£150 or offers
This kit was bought from Conrad Anderson and was fitted to my 2013 Fiat Panda 0.9 Petrol, but i think it will work on any fiat panda 319 from 2012 onwards.
This kit is currently still selling for £350.
It makes motorway journeys and longs drives much more enjoyable.
This is labelled as a Goldcruise GC90, but this is now sold as a LiteOn AP900
The only vehicle specific part here is the accelerator cable linkage. If you can rewire this or source the correct cable this kit could be made to work on any vehicle if you reconfigure as required.
To work on the Fiat Panda you need to plug this unit into the accelerator pedal wiring and then connect it to 12v (available on the back of the radio), and connect it to the 2 CANBUS lines at the back of the OBD socket.
The control unit can be mounted next to the electronic steering module on the Panda - which is visible/accessible when you remove the OBD socket cover
This cruise control kit comes with
* Main control module - Goldcruise GC90i - this should be mounted near to your OBD socket and needs a 12v supply (I used one from the back of the radio) along with CANBUS LOW/HI connections (can be made to the wire going into the back of the OBD socket). It uses the CANBUS lines to get brake, clutch and speed status.
* Control Stalk - Goldcruise GC3 - this stalk can be mounted to your steering column cowling and lets you set/resume the cruise and adjust the speed up or down. It has an indicator light on that tells you when it is active.
* Accelerator pedal cable for Fiat Panda 2012 on - this cable simply plugs into the back of the brake pedal and intercepts the accelerator wiring so that the unit can control the acceleration for cruise.
* Original instruction manual. This is available online if you search for "Goldcruise GC90 manual"
Please message me if you have any questions and i can try to answer them or send more detail
£150 or offers