seicentojay Member Parked in the garage Joined Sep 20, 2004 Messages 153 Points 60 Location rowley regis Mar 30, 2007 #1 hi all can any one tell me how to change the driveshafts on my fiat seicento 1.1 as they need changing and have been told its easier to change the whole lot rather then just the cv boot kits cheers
hi all can any one tell me how to change the driveshafts on my fiat seicento 1.1 as they need changing and have been told its easier to change the whole lot rather then just the cv boot kits cheers
rallycinq Autotest Special Parked in the garage Joined Mar 19, 2002 Messages 24,592 Points 3,862 Location Lake District....Moist Mar 31, 2007 #2 Eh! If the CV joints are clicking, replace them. The shafts are no more difficult or easier to do. Hub nut off, bottom ball joint undo, remove cv joint end, replace CV joint, rebuild. To do the shaft, remove the inner joint when the outer is already off. Cheers D
Eh! If the CV joints are clicking, replace them. The shafts are no more difficult or easier to do. Hub nut off, bottom ball joint undo, remove cv joint end, replace CV joint, rebuild. To do the shaft, remove the inner joint when the outer is already off. Cheers D
R randomizered ' Parked in the garage Written a guide Joined Feb 16, 2005 Messages 5,983 Points 988 Mar 31, 2007 #3 I have a recent thread in technical sub-forum asking how to remove them as well. May be worth a read, but its as rallycinq says Kristian
I have a recent thread in technical sub-forum asking how to remove them as well. May be worth a read, but its as rallycinq says Kristian