I have done a search and found out about spiggot rings.. however my girlfriend is looking for some alloys, and i done a search for alloy fitments.. came up with these which are 4x100 so wobblies should do it with spacers no?.. obviously if theyre the right width aswell...
BMW MINI (new) 4 x 100 35 57.0
BMW 3 series (E30) 4 x 100 15...25 57.0
Diahatsu Applause, Charade, Gran Move 4 x 100 38 56.0
Diahatsu Sirion 4 x 100 30...38 54.0
Honda Civic, CRX, Concerto, Prelude >91, Accord >91 4 x 100 35...38 56.0
Lada Riva, Samara 4 x 98 35...38 58.5 3
Mazda 121 >95, 323, Demio, MX3, MX5 4 x 100 35...42 54.0
Carisma, Colt 92>, Lancer 92> 4 x 100 35...42 56.0
Nissan 100NX, Almera, Micra, Sunny 4 x 100 35...42 59.0
Protons 4 x 100 35...42 56.0
Renault Clio, Megane, Laguna, R19, R21, Espace 4 x 100 35...38 60.0
Rover 200, 400, 25, 45 4 x 100 35...38 56.0
Seat Ibiza >93, Malaga 4 x 98 35...38 58.0
Seat Arosa, Cordoba, Ibiza, Inca, Toleda 4 x 100 35...38 57.0
Skoda Felicia, Favorit, Forman, Pick-up 4 x 100 35...38 57.0
Subaru Justy >95, Vivio 4 x 100 35...38 59.0
Toyota Corolla, MR2 >90, Paseo, Starlet, Yaris 4 x 100 35...38 54.0
Vauxhall Agila, Astra Mk 3, Calibra, Cavalier, Vectra 4 x 100 35...42 56.5
Volvo 340, 360, 440, 460, 480 4 x 100 32...38 52.0

So what happens if the centre bore is too big? do you have to get it made smaller? and if its too small you put spiggot rings on it to make it bigger?

Cheers

Craig

spiggot rings can only make them smaller

also taking offset into consideration

If they are smaller you can get them machined.

I see from that list that a Seat Ibiza >93 is 57mm centre bore R5GTT is 60mm, I had the wheels off my mates Ibiza a good few years back and got a local engineering firm in Glasgow to take them out for me, tho this still cost £40 and had to have no tyres on them.

Aaron.

why not just get her some fiat wheels? tis a lot les bother

I got Daihatsu wheels bored out to suit a Subaru, again needed the tyres off, but dead simple for an engineering shop to do.

Cheers

D

dave said:

why not just get her some fiat wheels? tis a lot les bother

Click to expand...

Yey! And just about anything from a Lancia or 4 stud Alfa will fit. Beemer wheels look aweful, even on Beemers.
:yuck:

Mini Cooper alloys on a cinq same fitment as punto gt alloys.. and friend has just got some new wheels for his mini... :yum: