My Sei Front window washer pump is faulty....with no workshop manual i'm confused as to how to go about repairing/replacing the faulty pump. The rear one works fine, but the front just stopped working all of a sudden. There is no noise from the pump when i try to work it.
Any tips would be very welcome, cheers.

if there's no noise check the fuses first of all.

mine went last year but it was making a noise, took the piping off and pulled something off one of the valves on the pipe and it started working again.

other than that... no idea

jack the car up, remove the drivers side wheel, then the arch liner. above the rad you will see the tank and both pumps. swap the wires over on them, and then test it. If when u press the front wash, the rear washes then u know the wiring for the front is fine. press the rear wash, and nothing should come out the front.

You'll know then where the fault lies, new pumps aren't much and are a piece of **** to fit