Hi folks

Due to me having to bypass the fan temerature sensor on my 1.1 Seicento 8V the connector to it has some arcing heat damage. (dont ask I had to get home somehow)

I would like to replace it but I do not know how to source it without getting a whole loom.

Can anyone point me in the right direction (just to be clear it is the connector plug that attaches to the temperature cut in switch for the cooling fan - 2 pin)

You can probably get one from FIAT (or AMP, who make most of the connectors -- they used to have an office in London).

Failing that, scrappy, Cento Painter, jiminwatford, etc.

Cinq one should be the same, maybe Mk1 Punto.

Just get some cable with it, strip (the cable!), solder, heat shrink.

The thermo-switch on the radiator should use one of these 20Amp connectors.
http://www.polevolt.co.uk/acatalog/info_1199.html
Crimp tool. Not used one as I have the ratchet type, but should be good for one offs?
http://www.polevolt.co.uk/acatalog/info_TT70.html
Look on e-bay for them.

I got one with a spare temp sender from the scrappy for £2 - result